CYP CH-1539TXPLPD, Руководство по эксплуатации

Страница: 23 / 44

18
6.7 RS-232 and Telnet Commands
COMMAND DESCRIPTION AND PARAMETERS
?
Show the full command list.
help
Show the full command list.
set factory default
Reset the unit to the factory defaults.
set system reboot
Reboot the unit.
get fw ver Show the unit's current firmware version.
set in N1 name N2 Set the name of the specified input.
N1
= 1 ~ 4 [Input port]
N2 = {Name} [8 characters max]
get in N1 name Show the current name of the specified input.
N1
= 1 ~ 4 [Input port]
get in name list
List the names of all inputs on the unit.
set out A name N1
Set the name of the output.
N1 = {Name} [8 characters max]
get out A name
Show the current name of the output.
set out A route N1 Route the specified input to the output.
N1
= 1 ~ 4 [Input port]
get out A route
Show the current input routed to the output.
set out A mask N1 Enable or disable the A/V Mask setting on the
output.
Available values for
N1
:
ON [Output muted]
OFF [Normal output]
get out A mask
Display the current A/V Mask setting for the
output.