CYP CH-1109TRXC, Руководство по эксплуатации, Страница: 8 / 13

4
6.2 Receiver Front and Rear Panels
LAN 1 LAN 2 LAN 3
HDMI Out
1 2 3 4 5 6 7
Front
Rear
Power
Extender Blaster
IR 2 IR 1
RS232 Out
CAT5e/6 In
Link
8
1
Power LED: The red LED will illuminate when the 24 V DC Adaptor is
connected to the AC outlet.
2
IR 1 Extender: Connect with the IR receiver cables (included in the
package) for IR signal reception. The related IR transmitter port is
IR1 Blaster.
3
IR 2 Blaster: Connect t with he IR blaster cables (included in the
package) for IR signal transmission. The related IR receiver port is
IR2 Extender.
4 RS-232 Out: Connect to a RS-232 enabled device (with a D-Sub
9-pin female cable) for the transmission of RS-232 commands.
5 Link LED: This yellow LED will illuminate when the both CAT5e/6
input and output signal is connected.
6
CAT5e/6 In: Connect the transmitter and receiver via a single
CAT5e/6 type cable for all data transmission.
7
HDMI Out: Connect to a HDMI equipped TV or monitor to display
the HDMI input source signal.
8
LAN 1/2/3: The LAN connections can be used to connect and
share up to 6 ethernet connections (3 at the reciver end, 3 at the
transmitter end), including computers, routers and media servers.