CYP CH-1109TRXC, Руководство по эксплуатации, Страница: 7 / 13

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
HDMI
Bypass
HDMI In
LAN 1 LAN 2 LAN 3
Power
DC 24V
Extender Blaster RS232 In
CAT5e/6 Out
Link
IR 2 IR 1
1 2 3 4 5 6 7 8 9
Front
Rear
10
1
Power LED: The red LED will illuminate when the 24 V DC Adaptor is
connected to the AC outlet.
2 DC 24V: Plug the 24 V DC power supply into the unit and connect
the adaptor to an AC outlet.
3 IR 1 Blaster: Connect with the IR blaster cables (included in the
package) for IR signal transmission. The related IR receiver port is
IR1 Extender.
4
IR 2 Extender : Connect with the IR receiver cables (included in the
package) for IR signal reception.The related IR transmitter port is
IR2 Blaster.
5
RS-232 In: Connect to a PC/laptop (with a D-Sub 9-pin male cable)
for the transmission of RS-232 commands.
6
Link LED: This yellow LED will illuminate when the both CAT5e/6
input and output signal is connected.
7
CAT5e/6 Out: Connect the transmitter and receiver via a single
CAT5e/6 type cable for all data transmission.
8 HDMI Bypass: Connect to a HDMI TV/monitor for instant display of
the HDMI input source signal.
Note: When the HDMI bypass is connected, no signals will be
transmitted to the receiver side. Therefore, unplug this connection
after confirming that the correct image is displayed
9
HDMI In: Connect to the HDMI equipped source equipment such
as DVD or Blu-ray player.
10
LAN 1/2/3: The LAN connections can be used to connect and
share up to 6 ethernet connections (3 at the reciver end, 3 at the
transmitter end), including computers, routers and media servers.