CYP CH-1109RXC, Руководство по эксплуатации, Страница: 8 / 18

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter
Rear Front
Power
DC 24V
Extender Blaster RS232 In
CAT5e/6 Out
Link
IR 2 IR 1
1 2 3 4 5 6 7
HDMI
Bypass
HDMI In
LAN 1 LAN 2 LAN 3
8 10 9 10 10
1 Power LED
The red LED will illuminate when the 24 V DC Adaptor is connected
to the AC outlet.
DC 24V
This slot is where you plug the 24 V DC power supply into the unit
and connect the adaptor to an AC outlet.
3 IR 1 Blaster
Connect the IR blaster cables included in the package for IR signal
transmission.
4 IR 2 Extender
These slots are to connect with the IR receiver cables included in
the package for IR signal reception.
5 RS-232 In
This slot is to connect with PC/laptop with D-Sub 9-pin male cable
for sending RS-232 commands.
6 Link LED
This yellow LED will illuminate when the both CAT5e/6 input and
output signals are connected.
7 CAT5e/6 Out
Connect the transmitter and receiver via a single CAT5e/6 type
cable for all data transmission.
8 HDMI Bypass
Connect to a HDMI TV/monitor for instant display of the HDMI input
source signal.
2