CYP CH-1109RXC, Руководство по эксплуатации, Страница: 10 / 18

10
6.2 Receiver
LAN 1 LAN 2 LAN 3
HDMI Out
7 8 8 8
Rear
Power
Extender Blaster
IR 2 IR 1
RS232 Out
CAT5e/6 In
Link
2
1
3
4
5 6
Front
1 Power LED
The red LED will illuminate when the 24 V DC Adaptor is connected
to the AC outlet.
2 IR 1 Extender
These slots are to connect with the IR receiver cables included in
the package for IR signal reception.
3 IR 2 Blaster
Connect the IR blaster cables included in the package for IR signal
transmission.
4 RS-232 Out
Connect to a device that can be controlled (via D-Sub 9-pin
female cable) by RS-232 commands.
5
Link LED
This yellow LED will illuminate when the both CAT5e/6 input and
output signals are connected.
6 CAT5e/6 IN
Connect the transmitter and receiver via a single CAT5e/6 type
cable for all data transmission.
7 HDMI Out
Connect to a HDMI equipped TV or monitor to display the HDMI
input source signal.
8 LAN 1/2/3
The LAN connections can be used to connect and share up to
6 ethernet connections (3 at the reciver end, 3 at the transmitter
end), including computers, routers and media servers.