CYP CDPW-K1US, Руководство по эксплуатации

Страница: 9 / 24

4
COMMAND DESCRIPTION PARAMETER
VER Show unit firmware version NONE
FADEFAULT All configure and macro
set to factory default
NONE
ETH_FADEFAULT All ethernet configure set
to factory*
NONE
REBOOT System reboot NONE
HELP Show command list NONE
HELP N Show descript of
command
N : COMMAND NAME
RELAY N N1 Relay control N(PORT)=1
N1=OPEN/CLOSE/TOGGLE
LEDBLUE N N1 Led blue backlight control N(LEN NO.)=1~8
N1=% (0-100)
LEDRED N N1 Led red backlight control N(LEN NO.)=1~8
N1=% (0-100)
LEDBLUES N All blue led backlight
control
N=% (0-100)
LEDREDS N All red led backlight
control
N=% (0-100)
LEDSHOW N Led dimming mode control LEDSHOW N
N=ON/OFF/TOGGLE
BACKLIGHT N All led backlight control N=% (0-100)
KEY_PRESS N
RELEASE
KEY_PRESS N
HOLD
Key press trigger type KEY_PRESS N RELEASE
N=PORT NUMBER
KEY_PRESS N HOLD
N=PORT NUMBER
MACRO N Macro setting MACRO RUN N N=MACRO
ID (1~16)
MACRO STOP
Note: *Any commands will not be executed unless followed by a
carriage return. Commands are case-insensitive.