4
6.2 Rear Panel
HDMI IN
EDID
STD TV
DC 5V
1
2
3
4
HDMI OUT
FIRMWARE
1
2
3
4
5
1
HDMI IN:
Connect from source equipment such as Blu-ray/DVD/
PS3 players, Set-Top-Box or any HDMI equipped source device for
input signal sending.
2
HDMI OUT 1~4:
Connect to HDMI TV/display or HD Amplifier for
output image and or audio display.
3
EDID STD/TV:
Switch this switch to set HDMI EDID’s setting.
Switch to TV mode allows the device to detect HDMI OUT 1’s EDID.
For example, when input source support 4K2K contents and output
1 also connected with 4K2K display. The device will send 4K2K
contents to output 1~4 however, if output 2~4 are connected to
non-4K2K TV/monitor then port 2~4 may have no image display
therefore, to ensure all outputs obtain image display OUT 2~4’s
EDID must obtain the equivalent EDID to OUT 1.
Switch to STD mode the EDID will support 1080p for video and PCM
2CH for audio.
4
FIRMWARE:
This slot is reserved for firmware update use only.
5
DC 5V:
Connect the adaptor included in the package and
connect to AC wall outlet for power supply.
