25
6.5.9 System Setting Tab
This tab provides system information, power control, network
configuration options, system configuration backup/restore/reset, and
firmware update functions.
1) Power:
Press this switch to toggle the unit’s power between ON
and OFF (stand-by mode).
Note: While in standby mode the unit’s WebGUI, Telnet and RS-232
controls are still active.
2) Network:
IP mode may be switched between Static IP or DHCP.
In Static IP mode the IP, netmask and gateway addresses may
be manually set. When in DHCP mode, the unit will attempt to
connect to a local DHCP server and obtain IP, netmask and
gateway addresses automatically. Please press “Save” after
making any changes to the IP configuration or mode.
Note: The unit’s default IP address is 192.168.1.50. If the IP address
is changed then the IP address required for WebGUI/Telnet access
will also change accordingly.
3) Web Timeout (Minute):
Select the length of time to wait before
logging the user out of the WebGUI due to inactivity. Available
range is from 1 to 120 minutes, or disabled.
Содержание CDPS-P311R
Страница 1: ...CDPS P311R HDMI VGA Video Streamer with Recording Operation Manual Operation Manual ...
Страница 2: ......
Страница 56: ...CYPRESS TECHNOLOGY CO LTD www cypress com tw ...