CYP CDPS-P311R, Руководство по эксплуатации

Страница: 26 / 56

21
SDCard (Micro-SD Card), NFS (NFS based network storage), and
CIFS (CIFS based network storage). Selecting “Auto” will use the first
available valid storage location using the following priority order:
NFS > CIFS > USB > SDCard
3) Overwrite: Enables or disables the file overwrite function. When
enabled, the unit will automatically delete older recordings, when
space runs out on the selected storage location, to make room for
new recordings.
4) Record Resolution: Select the maximum resolution to use for
streaming channel 1. Available resolutions are: 1080p(1920x1080),
720p(1280x720), VGA(640x480), or QVGA(320x240).
Note: The recording resolution will not exceed the original source’s
resolution even if a higher maximum is selected.
5) Record Framerate: Select the framerate to use for streaming
channel 1. Available framerates are: 25, 30, 50, or 60 frames per
second.
6) Record Quality: Select the target bitrate for streaming channel 1.
Available bitrates are: Best (6000Kbps), High (3000Kbps), or Normal
(2000Kbps).
7) Remote Storage (NAS) NFS: This section provides a way to
configure access to a NAS (Network Attached Storage) device
using the NFS protocol.
■ Enable: Enable or disable access to the defined NFS based
network storage server.
■ Remote IP: Enter the IP address of the target NFS based NAS
device. After entering the information, press the “Save” button.
■ Folder: Enter a valid share name on the target server. The
share name cannot contain spaces or special characters.
This is where the recording folder structure and video files will
be created. After entering the information, press the “Save”
button.
Note: The target folder on the NFS server must, at a minimum,
provide anonymous read, write and delete permissions.