CYP AVIP-P5104T-B1C, Руководство по эксплуатации

Страница: 6 / 36

1
1. INTRODUCTION
This AV over IP Transmitter is designed for high-quality, IP routable,
AV extension with minimum latency. By using a sophisticated ultra-light
compression scheme (lossless for most content) it’s a great solution
for extending 4K audio/video streams (HDMI or DisplayPort) and data.
Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color
and multi-channel HD Bitstream audio can be transmitted in pass-through
mode.
The use of high quality 10 Gigabit Ethernet ports and Cat.6A or better cable
allows for point-to-point transmission of the video signal up to 100m. Multiple
control and data signals may also be transmitted along with the audio and
video, including IR, RS-232, USB 2.0, and Ethernet.
When combined with the optional IP Master Controller or control software,
the functionality of the transmitter expands exponentially. Multiple
transmitters and receivers may be combined with one or more 10 Gigabit
Ethernet switches and the units can be used together to form a distributed
video matrix, a multiviewer system, or a video wall system adding to their
flexibility in large event installations. Additionally, the specially engineered
source preview functionality added to this hardware platform increases its
utility when controlled remotely.
The integrated USB hub of each transmitter can function as a simple point to
point KVM extension or freely routed between any two endpoints. This type
of USB KVM routing flexibility enables a wide range of multi-user, control
room, or on-demand installation scenarios.
The built-in EDID and HDCP management functionality enables the unit to fit
into every situation. Basic configuration of the unit can be achieved via front
panel buttons with an OSD (On-Screen Display). Advanced control requires
the optional IP Master Controller, or control software, and a LAN connection.