CYP AVIP-P5104T-B1C, Руководство по эксплуатации, Страница: 11 / 36

6
6
IR PORTS:
„
OUT Port:
Connect to an IR Blaster to broadcast IR signals from
a connected receiver to devices within direct line-of sight of the IR
Blaster.
„
IN Port: Connect to an IR Extender to receive IR control signals and
extend them to devices connected to a connected receiver. Ensure
that the remote being used is within direct line-of-sight of the IR
Extender.
Note: Currently, only 38KHz IR signal extension is supported.
7
RS-232 3-pin Terminal Block: Connect directly to a PC, laptop or serial
controllable device with a 3-pin adapter cable to extend the RS-232
signal between units.
8
LAN Port: Connect to an Ethernet supporting device or to your local
network as appropriate to extend the network between units.
9
USB/SERVICE (Mini-B) Port: Connect directly to a standard USB host
such as a PC or laptop to extend their USB functionality to all currently
connected/routed USB devices.
Note: This port is only active when “USB Control Mode” is set to “Device”.
In a Point-to-Point extension configuration, only one of the two units
should be set as a USB Device to avoid conflicts.
10
DC 12V Port: Plug the 12V DC power adapter into this port and connect
it to an AC wall outlet for power.
Note: Optional, not required if the unit is powered via PoE.