Cylinda Nova Trend E9004390, Руководство пользователя

Страница: 23 / 34

23
Touchcontrol panel
1. Speed decrease / switching off
This button is used to decrease the speed of the motor. Press and hold this button to
switch off the appliance
2.
Speed increase / switching on
In the off - mode press this button to switch on the motor in speed one.
Pressing this button while the appliance is in operation will increase the speed one step
higher (up to speed 4)
The speed of the motor is shown on the LED display. The digit on the display corresponds
to the speed of the motor (i.e. “1” indicates fi rst speed, “2” indicates second speed etc.)
3. LED display
Indicates the current function / mode of the hood
4. Timer
Enables to set automatic switch off of the hood
5. Lights on/off
Timer: to enable programming automatic switch off at any given time between 10 and 90
minutes, with 10-minute increments.
- To enable programming function, turn the engine on using the “+” button to the level you
want, and then press the button to program the switch-off time. The display will show a blink-
ing 0, which means, that the time programming mode was entered.
- Select the automatic switch-off time using the “+” button, keeping in mind, that the number
on the display, multiplied by the 10-minut interval, means the time of automatic switch-off (e.g.
1=10 min, 2=20 min, 3=30min, etc.)
- With the auto switch-off timer set, confi rm the setting using the timer button, the display will
stop blinking and will show the previously selected speed, and the blinking dot next to the
speed will show the switch-off time. You can cancel the automatic switchoff function by press-
ing the timer button again while the time is counted down.
Caution: Timer programming should be completed within 20 sesonds, otherwise no action
will be taken, and the hood will resume operation in normal mode.