Cylinda Nova Trend E9004390, Руководство пользователя

Страница: 21 / 34

21
The minimum distance between the supporting surface for
the cooking equipment on the hob and the lowest part of the
range hood must not be less than 50cm from electric cookers
and 65cm from gas or mixed cookers. If the instructions for
installation for the gas hob specify a greater distance, this
must be adhered to.
E
lECtriCal CoNNECtioN
The mains power supply must correspond to the rating indi -
cated on the plate located inside the hood. If provided with
a plug connect the hood to a socket which is in compliance
with current regulations and located in an easily accessible
area. If it is not fitted with a plug (direct mains connection)
or if after installation the plug is not located in an accessible
area, apply a double pole switch in accordance with standards
which assures the complete disconnection of the mains under
conditions relating to over-current category III, in accordance
with installation instructions.
Warning!
Before re-connecting the hood circuit to the mains
supply and checking the efficient function, always check that
the mains cable is correctly assembled.
The hood is provided with a special power cable; if the cable is
damaged, request a new one from Technical Service.
Expansion wall plugs are provided to secure the hood to most
types of walls/ceilings. However, a qualified technician must
verify suitability of the materials in accordance with the type
of wall/ceiling. The wall/ceiling must be strong enough to take
the weight of the hood. Do not tile, grout or silicone this appli -
ance to the wall. Surface mounting only.
This appliance is designed to be used either for exhausting or
filter version. The models with no suction motor only operate
in ducting mode, and must be connected to an external suc
-
tion device (not supplied).
The connecting instructions are supplied with the peripheral
suction unit.
Installation
Mounting
Use