ROTARY PERFORATING MACHINE RPM 350 PLUS
6
6.4
Reading of display
Symbol "P" appears, if there is a missing
Symbol "blc" appears if rollers are blocked
paper on the feeding table.
and the motor is overloaded.
Symbols "E-1" (E-2) appear if the upper lid (5) is not closed properly.
Diagnostics
Initial screen of diagnostics.
Appears when RESET button is being held for more than 3 secs.
3 dots on display are shining if:
1) There is no paper loaded on feeding table.
2) Sensor of the paper is not blocked (no paper inside machine).
3) Sensor of motor is blocked by screen placed on
driving pulley.
Left dot shows correct function of sensor, which defines revolutions
of motor. Slowly move the pulley. If everything is ok,
left dot stops shining always when sensor is not blocked by screen.
Middle dot shows correct function of sensor of counter.
To find out if sensor of counter works correctly, outshine it by
piece of paper. If everything ok, the middle dot stops shining.
Once the paper has been removed, the dot starts shining again.
Sensor is placed in the middle between left and middle feeding
wheel table.
