![Cyinstein GD-006 Скачать руководство пользователя страница 34](http://html1.mh-extra.com/html/cyinstein/gd-006/gd-006_user-manual_2704372034.webp)
Cyinstein
GD-006
34
1.
Choose a suitable rubber pad
and adhere it underneath Speed
& Cadence Sensor.
2.
Place Speed & Cadence Sensor
on left rear chain-stay (non-
drive side). Make sure to put the
logo side outwards as
illustrated. Do not tighten cable
ties completely to allow some
adjustment.
3.
Install Spoke Magnet Set
1.
Unscrew Spoke Magnet from the
plastic piece. Mount Spoke Magnet on
the spoke, and place the spoke in the
groove of the plastic piece.
2.
Use one suitable cross head
screwdriver to adjust the sensor arm to
within 10mm of Spoke Magnet, and
the magnet is aligned with Speed
Sensor Indication Line.
NOTE: You can tilt the sensor arm closer to either magnet for improved alignment.
4.
Reconfirm and then tighten
1.
Reconfirm that the magnets have to achieve recommended distances and aligning
sensing points.
2.
Make sure that the magnets do not interfere with each other nor interfere with your
bicycling. Then tighten all of the cable ties.