Smart Window & Door Sensor
User Manual
3 |
P a g e
Welcome to Cygnett Smart Home
Cygnett Smart Home is an ever-expanding collection of connected home products.
Synonymous for creating better digital experiences through design and innovation, Cygnett Smart Home affords
you the convenience and freedom to connect your appliances, lighting, climate control and security to a centralised
app.
Warning
Before replacing/installing your Cygnett Smart Home device, please read and follow all precautions, including the
following:
-
Suitable to operate between 0°C to 45°C
-
This product is intended for indoor use only; do not expose to wet environments
-
This product is not a toy and should not be played by children
-
This product is not suitable for water contact
Intended for indoor use only.
Place the Smart Window & Door Sensor in a cool and dry environment, away from water.
This product contains a coin/button cell battery inside. Keep batteries out of reach of children.
Swallowing may lead to serious injury or death in as little as 2 hours due to internal burns.
If swallowed, immediately call the 24-hour Poisons Information Centre on 13 11 26 (in Australia) or
24-hour Nationals Poisons Centre on 0800 764 766 (in New Zealand) for fast, expert advice. Dispose
of used batteries immediately.
This product has been designed so that the coin/button cell battery is not accessible to young children, as the
battery compartment cover is secured with a screw or mechanical fastener. Always ensure that the compartment
is secured before use.
Installation
Cygnett Smart Home devices only support 2.4GHz Wi-Fi networks. The Smart Window & Door Sensor
requires a Cygnett Smart Hub + IR Remote Control to function.
1. Ensure that your Cygnett Smart Hub + IR Remote Control* is set up correctly. For information on how to
set up the Smart Hub + IR Remote Control, please refer to the installation guide on Cygnett Care
–
support.cygnett.com
2. Using the included screwdriver, unscrew the screw and remove the backplate of the Smart Window &
Door Sensor.
3. Remove the battery pull tab and screw on the backplate using the
screwdriver.
4. Ensure that your phone/tablet is connected to the same Wi-Fi
network as your Cygnett Smart Hub + IR Remote Control.
5. Using the pin tool provided, press and hold the pairing button on
the Smart Window & Door Sensor for 5 seconds until it flashes to
activate pairing mode.