25
Copyright August 2013 Cyclotricity Ltd
The drawing to the right is how the
controller looks like inside the plastic box.
All the electrical devices on your bike
should have been pre-connected to the
controller by the time the bike reaches you.
However, if you ever face problems with
your bike, you may want to open the plastic
box and double check that there are no
loose or wrong connections to the
controller.
In most cases, you do not need to do this.
On the other hand, if you would like to
troubleshoot a problem, follow the
connections guide in the next page to
understand how your controller is meant to
be set up.
All wires coming out of the controller are
either uniquely shaped or colour coded to prevent wrong
connections. All you have to do is match the colours and shapes.
The next page shows a diagram of all the wires and how/where
they should be connected.
WARNING: Please do NOT open the metal box of the controller
itself. Doing so will void your warranty and may cause a safety
hazard.