18
Copyright August 2013 Cyclotricity Ltd
stay on the setup state and move on to configuring the
wheel diameter by pressing the 6km/h button.
Wheel Diameter Setup
-
Having adjusted the maximum speed and pressed the
6km/h button, you are now in the wheel diameter setup
state.
-
You will notice that the MED indicator as well as the
speedometer indicators is flashing. Press on/off or MODE
to set the right size of your wheel:
The first of the speedometer lights corresponds
to a 12” wheel.
The second light corresponds to a 14” wheel.
Thereafter 16”, 18”, 20”, 22”, 24”, 26”, 700c and
28” in this order. I.e. the 10
th
light will correspond
with a 28” wheel.
-
NOTE: Choosing the wrong wheel size will result in non-
accurate speed readings on your LED speedometer.
-
Press and hold the MODE button to save your settings and
exit the setup state.
-
NOTE: The LED will exit the setup state automatically if no
buttons have been pressed for more than 1 minute. In
which case, your settings will not be saved.