63
Copyright May 2020 Cycloricity Ltd.
-
Release the 6km/h button to suspend this function.
User Setup
You will need to configure the following functions on your device:
-
Maximum speed.
-
Wheel diameter (12”-28”).
ATTENTION: Not configuring this will result in the LED showing wrong Speed/Distance readings.
Speed Setup
-
Press and hold the on/off button to switch the device on.
-
Press and hold both on/off and MODE buttons simultaneously for 3-5 seconds. This will take
you into the LED setup state.
-
Once you enter the setup state, the LOW indicator as well as the speedometer indicators will
blink. Press the on/off or MODE buttons to increase/decrease the maximum speed
parameter (please note that 25km/h is the maximum legal speed limit allowed on the road
in the UK/EU). Each light on the speedometer indicators equates to 1km/h.
-
You can save this setting and exit the setup state by holding down the MODE button.
Alternatively, you can stay on the setup state and move on to configuring the wheel
diameter by pressing the 6km/h button.
Wheel Diameter Setup
-
Having adjusted the maximum speed and pressed the 6km/h button, you are now in the
wheel diameter setup state.
-
You will notice that the MED indicator as well as the speedometer indicators is blinking.
Press on/off or MODE to set the right size of your wheel:
The first of the speedometer lights corresponds to a 12” wheel.
The second light corresponds to a 14” wheel.
Thereafter 16”, 18”, 20”, 22”, 24”, 26”, 700c and 28” in this order. I.e. the 10
th
light
will correspond with a 28” wheel.
-
NOTE: Choosing the wrong wheel size will result in non-accurate speed readings on your LED
speedometer.
-
Press and hold the MODE button to save your settings and exit the setup state.
-
NOTE: The LED will exit the setup state automatically if no buttons have been pressed for
more than 1 minute. In which case, your settings will not be saved.
