Revision A.5
Cyclops Storm OSD tpalshadow English Translation
14
SYMBOL DESCRIPTIONS
Power Alarm
When the power consumption of the system reaches the value
prescribed by BAT SCALE in the menu, this symbol will appear and flash to alarm.
Semi-Manual Stabilization Mode
When flight mode is switched to stabilization
mode this symbol will appear. At this time the aileron is in auto-balance mode, and the
STORM OSD will maintain fixed altitude flight.
Height Locks and Heading Locks
In PA flight mode with the elevator stick in the
neutral position the system will lock and maintain altitude at the time of PA activation; the lock
symbol will appear next to your altitude. When you operate the elevator joystick the height
lock symbol will disappear and you may change the flight altitude. When the elevator joystick is
returned to neutral position the height lock symbol re-appears and the new current altitude is
used for altitude hold.
In PA flight mode, should you have heading hold enabled and the aileron stick is in the neutral
position, the lock symbol will appear next to your heading. When you operate the aileron stick,
the lock symbol will disappear and you may change the flight heading. When the aileron
joystick is returned to neutral position the height lock symbol re-appears and the new current
heading is used for heading hold.
Note
: If you have elevator and aileron stick centered and you do not see the lock symbol in PA
mode, you must re-set the SEV CENTER option in the menu.
Return to Home
Mode
Posture Alarm
This symbol indicates the system's measurement for posture value
is not accurate. The aircraft may only be operated manually. Switching flight mode to PA and
RTH is not allowed.
Possibilities causes for posture alarm:
1.
Excessive aircraft vibration.
2.
The first 10 seconds after starting the STORM OSD.
3.
The aircraft's roll angle exceeds 45 degrees.
4.
After a violent flight maneuver (i.e. spiral, extended inverted flight, etc.)
