background image

5

Version 1.0

1. Group

2. Signal (-)

3. Signal (+)

DMX OUT

1. Group

2. Signal (-)

3. Signal (+)

DMX IN

If you are using controllers with this occupation, you can connect the DMX-output of the controller directly 

with the DMX-input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other 

XLR-outputs, you need to use adapter-cables.

Building a serial DMX-chain:

Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture.

Always connect one output with the input of the next fixture until all fixtures are connected.

DMX-512 connection with DMX terminator:

For installations where the DMX cable has to run a long distance or is in an electrically noisy 

environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in 

preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply an 

XLR plug with a 120 resistor connected between pins 2 and 3, which is then plugged into the output XLR 

socket of the last fixture in the chain.

Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120 

resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the 

last fixture.

Power connection

Power Requirements

The PAR-150CZ luminaire operates on 100 to 240 volts AC (+/- 10%, auto-ranging). The luminaire 

contains an auto-ranging power supply.

Power linking between fixtures:

The fixture equiped with IP power in and out socket. Connect the power out to the power in socket in the 

next fixture till all are connected.

Caution: maximum power linking - 8 units.

Connection with the mains:

Connect the device to the mains with the enclosed power supply cable.

The occupation of the connection cables as below:

Cable color

Connection

International

Brown 

Live

L

Blue 

Neutral

N

Yellow/green

Earth(Ground)

Operation

The PAR-150CZ can operate different modes. In each mode you can run the fixture as a stand alone 

fixture or in a master/slave confiugration. This next section will detail the differences in the operating 

modes.

Содержание PAR-150CZ











Отзывы: