Introduction
Tools Required
Fasteners Used
Supplied by CycleSafe
Torx Screw x 1" Lg.
1" Dia. Black Hole Plug
3/8" Wide Flat Washer
3/8-16 x 1-1/4 Torx PHCS
3/8-16 Lag Housing
T45 Torx Driver
3/8-16NC Button Head
ALWAYS OBSERVE POSTED SAFETY GUIDELINES
WHEN ASSEMBLING THIS PRODUCT. ALWAYS WEAR SAFETY GLASSES
This Installation & Assembly Instruction will detail the tools required, fasteners and
components furnished, and assembly steps to successfully install the CycleSafe Octo
Rack High Density Bicycle Parking System.
Please read the instructions completely before
beginning.
Identify & inventory all parts using the packing list furnished with the shipment and the
parts list in this Installation Instruction. Any damage to the product must be immediately
reported to the shipping company.
Be sure to keep the hardware bags & contents
If you have difficulties or require further installation discussion, please contact our
Customer Service Experts
Call - 616.954.9977
Toll Free - 888.950.6531
Digital Copies of this Installation & Assembly Instruction may be found on our website:
www.cyclesafe.com
Power Drill Motor w/ Clutch
Carpenter's Square
Carpenter's Level
Hex Drive Bit Set
3/8" Ratchet & 12" Extension
3/8" Drive Deep Well Sockets
3/8" Drive T45 Torx Driver
DIM
[Inches]
Reference dimensions in this manual are
shown in both Standard Inch and [Metric].
Carpentry or Assembly skills are strongly
suggested
You will need skills at using powered hand tools, climbing ladders, and squaring the
assembled components. The recommended time budget for each Octo Rack is 1 to 2
man-hours.
NOTE:
The heaviest part is 70lbs (31.8kg).
Octo-Rack Assembly Instructions.xlsx
Printed: 9/20/2021
CONTROLLED DOCUMENT
Sheet 3 of 10
