RELEASE DATE:
BY:
REVISION DATE:
REV
PRODUCT NAME:
PRODUCT NUMBER:
ASSEMBLY INSTRUCTIONS
14-Oct-11
Geri Mohr
A
Basic Starter Shelter
17005 (BS2-S2P)
9
Assemble the Top Panels (10301) to the
Horizontal Frame (10202) and the Fascia
Assembly (17109) using the 5/16" Hex
Screws (10222).
DO NOT overtighten the fasteners to the SMC plastic
parts. They should only be wrench snug!
10
Locate and mount both Side Walls (17118)
to the legs using the 3/8" screws (17111) and
lock washers (17041).
11
Layout anchor bolt pattern using assembled
shelter. Drill 3/8" diameter X 2" deep hole
through the base plates and insert the anchors
into holes (use the concrete epoxy for
additional holding strength). Bolt through
base plates into anchors.
12
Insert Nutsert Plugs (17156) into all open nutserts.
Step - 12
WHEN ASSEMBLING THIS PRODUCT. ALWAYS WEAR SAFETY GLASSES
ALWAYS OBSERVE POSTED SAFETY GUIDELINES
Step - 9
Step - 10
Step - 11
WI4.9.044-A Shelter (17005) Installation Instructions.xlsx
Printed: 10/19/2011
CONTROLLED DOCUMENT
Page 6 of 6
FM4.5.002
Rev -
