RELEASE DATE:
BY:
REVISION DATE:
REV
PRODUCT NAME:
PRODUCT NUMBER:
ASSEMBLY INSTRUCTIONS
14-Oct-11
Geri Mohr
A
Basic Starter Shelter
17005 (BS2-S2P)
1
Mount (2) pair of LH (17149) and
RH (17150) panel brackets to the
stringers (17123) using 3/8" screws (17111)
and lock washer (17041).
2
Separate the four legs from the packaging.
There are (4) common legs (17128).
Top holes on the legs need to face outward.
3
Using the 3/8" screw (17111) and
lock washer (17041) locate and fasten
the stringer (17123) to the front/rear legs sets at
Step - 2
the "U" shaped saddle on top of the legs
4
Locate and mount the Cross Brace (17105)
to one set of Leg/Stringers using
3/8" screws (17111) and lock washer (17041).
Stand up one set of Legs/Cross Brace and
mount to the remaining set of Legs/Stringer
Fasten together using the 3/8" screws (17111)
and lock washers (17041).
The framework should stand by itself
SQUARE THE LEGS AND STRINGERS BEFORE TIGHTENING
5
Adjust the leg spacing so they are all on the same
outside dimension, including corner to corner
ALWAYS OBSERVE POSTED SAFETY GUIDELINES
WHEN ASSEMBLING THIS PRODUCT. ALWAYS WEAR SAFETY GLASSES
Step - 3
Step - 4
Step - 1
Step - 5
WI4.9.044-A Shelter (17005) Installation Instructions.xlsx
Printed: 10/19/2011
CONTROLLED DOCUMENT
Page 3 of 6
FM4.5.002
Rev -