CycleOps 100 PRO, Сборка и обслуживание: Руководство

Страница: 2 / 14

1
CHAPTER 1:UnPACking THE CyClEOPs indOOR CyClE
Place the box upright and cut the plastic binding straps. Lift the top of the box to expose the Indoor Cycle and packaging. Re-
move all parts from the box and foam inserts and ensure all the following parts are included:
Part Qty
Stabilizer front 1
Stabilizer rear 1
Main bike assembly 1
Handlebar tube 1
Seat post tube 1
Saddle w/ clamp 1
Seat assembly 1
Handlebar 1
Water bottle holder 1
Pedal set 1
IP hardware kit 1
Stabilizer bolts 8
Stabilizer bolt washers 8
Console Bracket bolts 2
Water bottle spacer 1
4mm Spacer bolts 2
Multi-purpose wrench 1
5mm allen wrench 1
4mm allen wrench 1
Console Bracket w/ screw 1
Console (400 Pro, 300 Pro, 200 Pro) 1
CHAPTER 2:
BikE AssEmBly
step 1: attach stabilizer Feet
1. Note the difference between the front and rear stabilizer feet. The larger foot with wheels goes in the rear of the IC.
2. Align the rear base of the frame with the rear stabilizer and secure it with four 6mm bolts with washers. NOTE: Tighten
the inner bolts first, and then proceed to the outer bolts to ensure the foot is secured properly and evenly.
3. Repeat with the front stabilizer.
Front Stabilizer Feet
Rear Stabilizer Feet