Cycle Torch MicroBot Tail Light, Руководство пользователя

Страница: 5 / 9

SHARK 550R USER MANUAL
5
1 2
3
1 2 3
1 2 3
1 2
3
How to Charge
SHARK 550R HEADLIGHT
Remove the rubber cap
at the bottom of light; Connect the light to your PC,
or a 5V max 2A USB battery
charger with the USB cable.
The power button lights up,
and charging starts;
When the power button
turns blue, charging is
complete. Remove the
USB cable.
The cable (or other accessories) supplied with the Cycle Torch bike light MUST be
used only to charge the Cycle Torch bike lights. The Manufacture or/and the Seller
are not responsible for any damage caused by using the supplied accessories with
the devices other than Cycle Torch bike lights.
WARNING
TIPS AND TRICKS:
• When your PC is in a sleep state, the light cannot be charged;
• Flashing light of the power button shows that a charging error has occurred. Remove and reinsert
the USB cable, then begin the recharge process again;
• The battery charges to about 80% after approximately 4 hours for a headlight and 1,5 hours for a tail light;
• Charging and lighting times are approximate values, and will vary by environmental and user conditions.
3
MICROBOT TAIL LIGHT
Remove the rubber cap
at the bottom of MicroBot ; Connect the MicroBot to your
PC or a 5V max 2A USB battery
charger with the USB cable.
The Power Button lights up red
when the charging starts; When the Power Button
lights up blue, charging
is complete. Remove the
USB cable.