WARN 1.5/15RT-XT/2500/3000 WINCH
MOUNTING INSTRUCTIONS
Install the roller hawse mount plate included with the winch to the mounting bracket weldment,
using the four bolts PROVIDED WITH THE WARN WINCH. The roller hawse mount plate supplied
with the winch kit will not be used. The roller hawse mount plate will need to be mounted on the
bottom side of the mounting bracket weldment (to allow for clearance of the winch) and the winch will
be mounted on the top side of the mounting bracket weldment. Be sure that when the winch is
mounted to the ATV the winch motor is on the
RIGHT
side of the machine. GO TO ROLLER
HAWSE INSTRUCTIONS.
ROLLER HAWSE MOUNTING INSTRUCTIONS
Remove one of the long rollers and the two side rollers and feed the winch cable through
the roller hawse. Reinstall the rollers and be sure rollers move freely.
Attach the roller hawse to the roller hawse mount plate using the 3/8” x 1” bolts and
nylock nuts provided with the winch. Tighten all hardware.
See Winch Wiring Instructions supplied with the Winch for proper installation.
6.
Re-install screens, headlight/grill assembly and storage compartment removed from
ATV in Steps 1-3.
5
