Chapter 4: Command Line Interface
33
The following commands are available only to the admin user.
NOTE: When a range of outlets is used in a command and the range spans more than one PM IPDU in a daisy
chain, the range of outlets must not be specified by name. The range of outlets may only be specified by number
in this situation.
adduser
The adduser command adds one username to the internal database. A maximum of eight characters
(not case sensitive) is allowed, and a maximum of eight individual users is allowed. This command
is available to the admin user only.
Syntax
adduser <user>
Arguments
<user>
username
Examples
To add a user, enter the following.
Table 4.2: Admin User (privileged) Commands
Admin User Command
Admin User Command
adduser on page 33
hwocp on page 44
alarm on page 34
id on page 45
assign on page 34
name on page 48
buzzer on page 35
reboot on page 51
currentprotection on page 36
restore on page 53
dbsync on page 39
save on page 53
deluser on page 39
syslog on page 55
display on page 40
unassign on page 57
factory_defaults on page 41
upgrade on page 58
pm>
adduser popper
Password:
Re-enter password:
Username/password set for user popper.
pm>
Содержание PM IPDU
