Cyclades AlterPath KVM 16, Руководство пользователя

Страница: 96 / 206

4: KVM Web Configuration
4-4 AlterPath KVM Manual
ports are shared. This is true as long as both user types share the same
permissions (
e.g ., Read/Write, Read Only).
For example, if Group A has Read/Write permissions to ports 2, 4, and 6
while the Generic User has Read/Write Permissions to ports 1, 3, and 5, then
the system will provide both users (Group A and Generic User) Read/Write
Access to ports 1, 2, 3, 4, 5 and 6.
Logging In
IMPORTANT : Take note of this login procedure. All subsequent online
procedures in this chapter will assume that you are already logged in .
1. Connect your internet browser to the KVM web interface by typing in the
KVM server’s IP address ( e.g ., http://10.0.0.0) in the browser’s address
(URL) field.
To determine the IP address of your KVM, switch on the KVM connected to
the Ethernet where there is a DHCP server. When you inquire, based on the
MAC address (the 12-digit hexadecimal number located at the bottom of the
KVM unit), the server will provide the appropriate IP address.
If there is no DHCP server, use the default static IP address that is pre-
configured in the KVM: 192.168.160.10.
See the section on Determining the IP Address, Chapter 2: KVM
Installation , for more detailed information.
The system brings up the AlterPath KVM Login page: