Cyclades AlterPath KVM 16, Руководство пользователя

Страница: 95 / 206

4: KVM Web Configuration
AlterPath KVM Manual 4-3
Changing the Password
The table below summarizes the methods in which the different users can
change their password.
For more detailed information, refer to the Users and Groups section of this
chapter and
Chapter 3: OSD KVM Configuration .
Hierarchy of Permissions
By default, the Generic User has no access. Any user that you add inherits the
access permissions of the Generic User. To override the access permissions of
a Generic User, all you need to do is add the user to a group that has the
desired permissions.
Conflicting Permissions
When the configured permission for a user in a group varies from the Generic
User permission, the system will follow the user’s group permission. In short,
Group permissions supersede Generic User permissions.
If, for example, User X in Group A has Read/Write access, while the Generic
User is configured as Read Only, then the system follows the permissions for
Group A. User X should have Read/Write Access.
Complementary Permissions
With regards to port access, if the configured access permissions for a user in
a group varies from the generic user, then the access permissions to these
User
Type
Where to
change the PW
Who can
change the PW
How
root CLI root user From system prompt, type in
command,
passwd , and follow
system prompt. Then type in
saveconf to save password.
admin WMI and OSD root user
admin user From WMI, go to: Configuration >
KVM > Users & Groups.
From OSD, go to Configure >
Users and Groups > Local Users >
Change Password.
Regular
User OSD root user
admin user Same as above.