The Manual of Ink-jet Printer
10
Operation
Pic3
1.print head management
Click this button will open the interface of print head management. You can set the value of idle-jet
and the continual serial no on this page.
A.Idle-jet
If you choose
solvent
ink system, in order to prevent the ink on the surface of the print head
becoming dry out which will cause illegible printing result you may need to start idle-jet printing function
according to the chosen ink type, temperature,moisture and air flow rate to set the period and line for
idle-jet printing. Recommend idle-jet printing
period
is 10 seconds and lines for idle-jet printing is 10. (if
the air flow rate is fast or the temperature is high, the
lines
for idle-jet printing need to be 20 or more.)
Pic 4
It is not necessary to use idle-jet printing in porous system. But if in the environment with heavy dust,
use idle-jet can be used for dust-protection.
Note:
Do not change the velocity. The value must be 4250HZ.
B. Continual number function
The continuous number will increase on each successive print activation no matter when power off has
been done.
