The Manual of CYCJET Ink-jet Printer
7
Install & Test
Only trained technicians are authorized to carry out installation.
Before install, confirm the machine was stay in a solid & smooth place without electromagnetic radiation.
Installed as stipultated in manufacturer
’s specification, do not change the relative position of ink system
and print head. Any special requirements, please consult the manufacturer and supplier directly.
Ink-jet Printer Installation & Testing
Photo1
1
、
Unpacking: open the package and move out printhead, host machine, suspension pad etc.
2
、
Suspension Pad Installation: 1) fix pads into triangle stands with same height. 2) adjust the three pads
so as to keep the triangle stand in vertically. 3) fasten the three screw nuts with the spanner.
3
、
Ink tank installation: 1) Put small steel pipes into large ones and put large steel pipes into striangle
stands, after adjusted the height, fasten the starlike screw.2) Put the two-hole aluminium stand in
profile of ink tank system into small steel pipe, and then fasten by starlike screw.
4
、
Host Machine Insatalltion: Put the two-hole aluminium stand in profile of host machine into small steel
pipe, and then fasten by starlike screw.
5
、
Printhead Insatalltion: 1)put the aluminum stick into the two-hole aluminum stand, and fanstened by
starlike screw. 2)Screw the printhead on aluminum stick. 3)connect one side of ink tube to filter and the
other side to ink inlet.