Cycjet ALT 200, Руководство пользователя, Страница: 23 / 26

The Manual of CYCJET Ink-jet Printer 22
Eliminate Troubles

System troubles
：
No dot can be spilt out
The data wire of printhead is
loose
Power off, connect the data wire once
again
electromagnetic radiation
interference.
Far away from the source of radiation
and restart the machine
Printhead system is damaged Replace the printhead system
Printhead system is
damaged

Scratch caused by
something inserting into
printhead gap.

Printhead blocked caused
by using non-approved
consumables.

Printhead blocked caused
by Blended using the
different types of
consumable.

The unregular mantenance
makes ink dryness.

The electrocircuit is
damaged by connecting the
data wire in POWER ON
status.

Break wire or loose wire
caused by pulling.

Printer is not grounded, and
the power supply is not
good.
Replace the printhead system
When installed with
encoder, the printing result
shows nonuniform in
length.
The encoder selection function
is not startup.
Please start up the encoder selection
function
Encoder wheel rolls unentired Ensure the encoder wheel is contact
product completely.
speed rate of printing is too
small
The normal value of speed rate is
around in 8, the value is smaller, the
printed file is shorter.
Product moving speed is too
fast.
Slow down the moving speed. The