CYBEX V Series, Руководство по сборке

Страница: 26 / 31

Preventive Maintenance Schedule
Biannually Monthly Weekly Item
Inspect Clean Console Overlays
Inspect Clean Bottle Holders / Accessory Trays
Inspect Console Mounting Bolts
Inspect Hardware
Inspect Clean Frame
Inspect Clean Plastic Covers
Clean / Inspect Lifepulse Sensors
Inspect Striding Belt Centered
Clean / Inspect Emergency Stop Magnet
Vacuum / Clean Clean Motor Cover
Inspect Motor Electronic Compartment
Inspect Drive Belt
Inspect / Adjust Leg Levelers
Inspect Front and Rear Rollers
Inspect Clean Side Step Area
Inspect Clean Side Hand Rails
Inspect Clean Ergo™ Front Handlebar
Troubleshooting the Treadmill
No power
Corrective Action Probable Cause
Turn the switch to the ON position. ON / OFF switch is not in proper position.
Plug treadmill into an appropriate circuit. Refer to Grounding
Instructions.
Note: In North America use a dedicated 20 amp circuit.
Using a voltmeter, verify power at outlet. If no power exists, reset
circuit breaker at panel.
Power source is insufficient.
Replace line cord. Contact Customer Support Services. Line cord is damaged.
Inspect power connections at wall outlet and at machine for proper
contact.
Line cord is improperly seated in socket.
Striding belt slips off- center.
Corrective Action Probable Cause
Check levelers and level treadmill. Check striding belt & re-tension
as necessary. Refer to
How to Adjust and Tension the Striding Belt.
Floor surface is uneven.
Page 26 of 31