background image

Safety

Safety Information

It is the sole responsibility of the purchaser of Life Fitness Family of Brands products to read the owner’s manual and warning labels

and instruct all individuals, whether they are the end user or supervising personnel, on proper usage of the equipment.
UNDERSTANDING EACH AND EVERY WARNING TO THE FULLEST IS IMPORTANT. IF ANY OF THESE WARNINGS ARE UNCLEAR, CONTACT

Life Fitness Family of Brands CUSTOMER SERVICE IMMEDIATELY AT 1-800-351-3737.
This equipment is categorized as class S per EN ISO 20957-1. As such this equipment is only intended for commercial, institutional

and/or studio facilities. It is not intended for home use. Contact Life Fitness Family of Brands with any questions regarding this

classification.
It is recommended that all users of Life Fitness Family of Brands exercise equipment be informed of the following information prior to

use.

Operating Warnings

WARNING: 

This product can expose you to chemicals including Di-isobutyl Phthalate, which is known to the State of

California to cause birth defects or other reproductive harm, and Antimony Trioxide, which is known to the State of California

to cause cancer. For more information go t

http://www.P65Warnings.ca.gov

• It is the purchaser’s sole responsibility to properly instruct its end users and supervising personnel as to the proper operating

procedures of all equipment.

• This equipment is not intended for use by children. Keep children under the age of 13 away from the machine.
• Do not allow users to wear loose fitting clothing or jewelry while using equipment. It is also recommended to have users secure

long hair back and up to avoid contact with moving parts.

• All bystanders must stay clear of all users, moving parts and attached accessories and components while machine is in operation.

Access Control

• Life Fitness Family of Brands recommends that all commercial fitness equipment be used in a supervised area. It is recommended

that the equipment be located in an access controlled area. Control is the responsibility of the facility owner.

Installation

• Life Fitness Family of Brands recommends that all equipment be secured to a solid, level surface to stabilize it and eliminate

rocking or tipping over. This must be performed by a licensed contractor. See 

Bolt to Floor Guide

 for installation procedure.

Proper Usage

• Do not use any equipment in any way other than as designed or intended by the manufacturer. It is imperative that Life Fitness

Family of Brands equipment is used properly to avoid injury.

• Injuries may result if exercising improperly or excessively. It is recommended that all individuals consult a physician prior to

commencing an exercise program. If at any time during exercise you feel faint, dizzy or experience pain, STOP EXERCISING and

consult your physician.

• Keep body parts (hands, feet, hair, etc.), clothing and jewelry away from moving parts to avoid injury.

Inspection

• DO NOT attempt to use or repair any accessory approved for use with the equipment which appears to be damaged or worn.
• DO NOT use or permit use of any equipment that is damaged and/or has worn or broken parts. For all Life Fitness Family of Brands

equipment, use only replacement parts supplied by Life Fitness Family of Brands.

• Maintain labels and name plates - Do not remove labels for any reason. They contain important information. If unreadable or

missing, contact Life Fitness Family of Brands customer service for a replacement.

• Equipment Maintenance - Preventative maintenance is the key to smooth operating equipment as well as to keep your liability to a

minimum. Equipment needs to be inspected at regular intervals.

• Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. Life Fitness

Family of Brands will provide service and maintenance training at our corporate facility upon request or in the field if proper

arrangements are made.

• Before use, examine all accessories approved for use with the Life Fitness Family of Brands equipment for damage or wear.

Page 4 of 44

Содержание Structure ST-FSS















































Отзывы: