4-1
All preventive maintenance activities must be performed on a regular basis. Performing
routine preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex
Strength Systems equipment.
NOTE:
Cybex is not responsible for performing regular inspection and maintenance actions
for your machines. Instruct all personnel in equipment inspection and maintenance
actions and also in accident reporting/recording. Cybex phone representatives are
available to answer any questions or concerns that you may have
.
Chapter 4 - Maintenance
Daily Procedures
NOTE:
All inspections and
repairs must be
performed by trained
service personnel only.
CAUTION: Use only Cybex certified replacement
parts when servicing. Failure to do so
could result in personal injury.
1. Upholstery -
Wipe down all upholstery using water based disinfection solution.
2. Frames -
Wipe down all frames using a mild solution of warm water and car wash soap. Be sure to dry
thoroughly.
AVOID
acid or chlorine based cleaners and also cleaners containing abrasives as these could
scratch or damage the equipment.
3. Chrome -
Clean chrome tubes, first using chrome polish and then using a car wax seal. Neutral cleaners with
a pH between 5.5 and 8.5 are recommended. Be sure to dry thoroughly.
AVOID
acid or chlorine based cleaners
and also cleaners containing abrasives as these could scratch or damage the equipment.
4. Guidelines for cleaning front panel:
•
Use clean soft cloths or sponges for application of cleaners and again for washing and rinsing.
•
Follow up the application with warm water rinse.
•
Don’t use abrasives or high alkaline cleaners.
•
Don’t leave cleaners on for long periods, wash immediately.
•
Don’t apply cleaners in direct sunlight or at elevated temperatures.
•
Don’t use scrapers, squeegees or razors.
•
Don’t clean with gasoline.
