CYBEX CI-LCE, Руководство по сборке

Страница: 22 / 38

20. Slide the carriage bolt to the end of the slot in the lower pulley assembly using a 17mm wrench.
Item Description Qty.
1 Carriage Bolt, M10 x 1.5, 50mm 1
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
21. Install screws and washers securing the lower pulley assembly to the tower frame using an 8mm Allen wrench.
Item Description Qty.
1 Cable 1
2 Lower Pulley Assembly 1
3 Washer, Flat 3/8" 4
4 Screw, M10 x 1.5, 25mm 4
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Cable Routing
1. Remove screw, washers, and locknut securing the pulley to the main frame using an 8mm Allen wrench and 17mm wrench.
Item Description Qty.
1 Pulley, 4.5" OD 1
2 Screw, M10 x 1.5, 50mm 1
3 Washer, Flat 3/8" 2
4 Nut, M10 x 1.5, Hex Nylock 1
Page 20 of 36