User's Guide
TROUBLESHOOTING
THE SCREEN CAN NOT BE DRAGGED!
The graphicsprocessor used on the CyberVision PPC (Permedia2) is not capable of this Amiga
specific feature. Dragable screens are thus not supported on the CyberVision PPC.
AFTER OPENING A CYBERVISION SCREENMODE, MY COMPUTER CRASHES WITH A
GURU!
Many people use system patches on their Amiga, to get access to new features. Unfortunatly
some of these patches make changes to the OS so that the Intuition emulation cannot work
100% correctly. Please de-install these patches before using the CyberVision PPC.
SOME SCREENMODES WILL NOT BE DISPLAYED
Modern monitors switch off if the synchronisation frequency is beyond the monitor
specifications. The affected screenmodes should be fitted to the monitor using CGXMode.
THE INSTALLER ABORTS DURING THE PROCESS
There are different Installers from Commodore and Amiga Technologies. We have been told
that the Installer is font-sensitive, it seems to be not. What might happen is that the Installer
automaticly comes up with an ABORT requester during the installation, this only happens if your
font is TO BIG. To avoid this, go to PREFS/FONT and change the active font to TOPAZ/8, this
should solve the problem.
THE MONITOR DOES NOT DISPLAY ANY SCREEN / DISPLAYS A GREY SCREEN
Please check that you really have the monitor connected to the graphics card. The standard
videoport is not able to handle the new screenmodes.
THE MONITOR DISPLAYS ONLY THE CYBERGRAPHIX LOGO OR STAYS BLACK THOU I
HAVE CONNECTED THE MONITOR PROPERLY
Neverless you have installed the software properly, you must switch your standard workbench
page 34