Shenzhen Zhiyong Electronics Co., Ltd
1
Preface
First of all, thank you for purchasing our products, this instruction manual is the
description about the function, usage, operation attention points, etc. Before use, please
read the instructions carefully and use correctly.
Manual annotation will use the following symbols to distinguish.
To prevent shortage and accident, the circuit under test should be below 600VAC.
Do not test the naked conductor.
Do not touch the conductor under test and the sensor head during testing.
When the oscilloscope is connected with other test terminal, please pay attention to the following
points:
Please use the basic insulation device with proper voltage and pollution range when connecting
the test terminals between CPL2000 and devices.
Do not input voltage surpassing the safety range if the basic insulation of the test terminal does
not meet the requirement.
Please refer to the matters need attention about electronic safety.
Electric shock could occur if the machine or the user’ hand is wet during testing.
The sensor head is consisted of precision devices including magnetic core, hall component. The
drastic change of temperature or the external impact could damage the sensor so please avoid
Notice
Warning
Notice
Warning
In the case of wrong operation, the user risk injury. The content under this
mark records the relevant matters needing attention to avoid such dangers.
The user may suffer minor injuries and material damage with the wrong
operation. To avoid such situation, the matters under this mark need attention.
This symbol means it is harmful to the machine and human body; you must
strictly follow the instruction manual to operate.
Note
This symbolizes important note about how to use the machine.
CYBERTEK
