CyberTAN ZE250-A-IN, Быстрое руководство по установке

Страница: 8 / 11

Advanced Z-Wave Functions
These Advanced Z-Wave Functions are usually needed only for
specific (and rare) technical situations, or for professional installers
creating very large systems, or for developers creating new hardware
or software.
You may need to access these advanced functions if there’s a problem
with your system and you need to reset the Z-Wave network, if you
want to upgrade to a different model of CyberTAN Controller, to
enable another controller to operate your CyberTAN ZE250,
or for other technical situations as described below.
To access Advanced Z-Wave Functions select Settings and then
Z-Wave Settings. Select the Advanced tab (Figure 3-1).
From there you’ll be able to access these Advanced Z-Wave options:
Reset Z-Wave network
Will clear all the user configuration data and assign a new
Z-Wave HouseID.
Copy Z-Wave network from a primary controller
Will allow the unit to copy all Z-Wave related information from
a Primary Z-Wave Controller and is used with Replication.
Controller shift
Tells CyberTAN to transfer the role of primary controller to
another Z-Wave controller. The other Z-Wave controller will be-
come the ‘Master controller’, and CyberTAN will be a secondary
controller. This means the other Z-Wave controller will then be
responsible for healing the networking and being the SIS/SUC
(a technical Z-Wave term). Normally, by default, CyberTAN is the
master controller and is SIS/SUC.
A
A
B
B
C
C
Figure 3-1: Advanced Tab