CyberResearch MPE 06, Руководство пользователя

Страница: 85 / 98

CyberResearch
®
Displays MPE Series
CyberResearch, Inc . 85
25 Business Park Drive P: (203) 643-5000; F: (203) 643-5001
Branford, CT USA www.cyberresearch.com
7.4 Change the Touch Screen Interface
If the touch screen interface must be changed from an RS-232 interface to a USB
interface or, from a USB interface to an RS-232 interface, the following steps must be
followed.
Step 1: Uninstall the touch screen driver
Step 2: Remove the interface cable i.e. remove the RS-232 cable or the USB cable
Step 3: Install the new cable i.e. install the USB cable or the RS-232 cable.
Step 4: Reinstall the driver DVD as described above. Step 0:
7.5 Calibrating the Touch Screen
To calibrate the touch screen cursor with the motion of the touch screen pen (or finger),
please follow the steps below:
Step 1: Make sure the system is properly connected through an RS-232 or a USB
interface to the MPE Series monitor.
Step 2: Make sure the touch screen driver is properly installed.
Step 3: Locate the PenMount Monitor icon in the bottom left corner of the screen.
Figure 7-10: PenMount Monitor Icon
Step 4: Click the icon. A pop up menu appears. See Figure 7-11 .