manualshive.com logo in svg

CyberResearch GFC IPM, Руководство пользователя, Страница: 8 / 90

Поделиться
Скачать
CyberResearch GFC IPM Скачать руководство пользователя страница 8

computer/KVM and the host port of the GFC IPM switch. 

9. Connect one purple end of 3-in-1 cable to the PS/2 mouse port on the host 

computer/KVM, and the other end of 3-in-1 cable to the host PS/2 mouse port on the 
GFC IPM Switch. 

10. 

Connect one green end of 3-in-1 cable to PS/2 keyboard port on the host 
computer/KVM, and the other end of 3-in-1 cable to the host PS/2 keyboard port on the 
GFC IPM switch. 

11. (Optional) Connect the type A connector of USB A-B cable to the host computer, while 

using remote mass storage control. 

12. Connect Ethernet to LAN port and/or modem to serial port, depending on how you want 

to access GFC IPM switch 

1.2 Initial IP configuration 

In factory default, DHCP mode is disabled (IP auto configuration = None), and the IP 
settings are as below: 

IP address 

192.168.1.22 

Subnet mask 

255.255.255.0 

Default Gateway 

None 

If DHCP mode is enabled (IP auto configuration = DHCP), the GFC IPM switch will try 
to contact a DHCP server in the subnet to which it is physically connected. If a DHCP 
server is found, it may provide a valid IP address, gateway address and net mask. 
Before you connect the device to your local subnet, be sure to complete the 
corresponding configuration of your DHCP server. It is recommended to configure a 
fixed IP assignment to the MAC address of the GFC IPM switch. You can find the MAC 
address labeled on the bottom side of the metal housing. 

GFC IPM switch Setup Tool 

If this initial configuration does not meet your local requirements, use the setup tool to 
change the configurations to your needs. The setup tool 

PSetup

 can be found on the 

CD ROM delivered with this package. You can follow the procedures described below. 

1. DHCP  

If you have installed the GFC IPM switch on a network that enables DHCP, you can 
use the 

PSetup

 to find out the GFC IPM switch’s IP. 

(1) Plug Ethernet cable to GFC IPM switch. GFC IPM will get an IP via DHCP. 
(2) Using 

PSetup

(run PSetup.exe) to look for GFC IPM.   

      a. Select MAC address which label on bottom of the GFC IPM switch 

GFC IPM  

 

CyberResearch

® 

KVM Accessories 

 

6

  

©Copyright 2009 

CyberResearch, Inc.

 

 

 

 

Содержание GFC IPM



























































































Отзывы:

Нет отзывов