background image

CyberResearch

® 

Digital I/O

 

 

CYDIO 9HE

      

 

 

 

Product Service 

 

Diagnosis and Debug 

CyberResearch, Inc. maintains technical support lines staffed by experienced 
Applications Engineers and Technicians. There is no charge to call and we will 
return your call promptly if it is received while our lines are busy. Most problems 
encountered with data acquisition products can be solved over the phone. Signal 
connections and programming are the two most common sources of difficulty. 
CyberResearch support personnel can help you solve these problems, especially if 
you are prepared for the call.  
 
To ensure your call’s overall success and expediency: 
 
1) 

Have the phone close to the PC so you can conveniently and quickly take 
action that the Applications Engineer might suggest. 

2) 

Be prepared to open your PC, remove boards, report back-switch or jumper 
settings, and possibly change settings before reinstalling the modules. 

3) 

Have a volt meter handy to take measurements of the signals you are trying 
to measure as well as the signals on the board, module, or power supply. 

4) 

Isolate problem areas that are not working as you expected. 

5) 

Have the source code to the program you are having trouble with available 
so that preceding and prerequisite modes can be referenced and discussed. 

6) 

Have the manual at hand.  Also have the product’s utility disks and any 
other relevant disks nearby so programs and version numbers can be 
checked. 

 
Preparation will facilitate the diagnosis procedure, save you time, and avoid 
repeated calls. Here are a few preliminary actions you can take before you call 
which may solve some of the more common problems: 
 
1) 

Check the PC-bus power and any power supply signals. 

2) 

Check the voltage level of the signal between SIGNAL HIGH and 
SIGNAL LOW, or and SIGNAL– . It CANNOT exceed the full 
scale range of the board. 

3) 

Check the other boards in your PC or modules on the network for address 
and interrupt conflicts. 

4)

 

Refer to the example programs as a baseline for comparing code. 

CyberResearch, Inc

.  

15

 

25 Business Park Drive 

 

P: (203) 643-5000; F: (203) 643-5001 

Branford, CT USA 

 

www.cyberresearch.com 

Содержание CYDIO 96HE

























Отзывы: