CyberResearch CPGN C2-30-X, Руководство пользователя

Страница: 53 / 122

©Copyright 2011 CyberResearch, Inc. 53
NOTE:
CyberResearch has a wide range of backplanes available. Please
contact your CyberResearch® applications engineer or visit the
CyberResearch website at www.cyberrsearch.com to find out more
about the available backplanes.
4.3.4 C CPU Card Installation
To install the CPGN CPU card onto the backplane, carefully align the CPU card interface
connectors with the corresponding socket on the backplane. To do this, please refer to
the reference material that came with the backplane. Next, secure the CPU card to the
chassis. To do this, please refer to the reference material that came with the chassis.
4.4 J Jumper Settings
NOTE:
A jumper is a metal bridge used to
close an electrical circuit. It consists of
two or three metal pins and a small
metal clip (often protected by a plastic
cover) that slides over the pins to
connect them. To CLOSE/SHORT a
jumper means connecting the pins of
the jumper with the plastic clip and to OPEN a jumper means removing
the plastic clip from a jumper.
The CPGN includes one jumper shown in Table 4-1 .
D e s c rip tio n L a b e l T y p e
Clear CMOS jumper J_CMOS1 3-pin header
Table 4-1: Jumpers