CyberResearch CPGN C2-30-X, Руководство пользователя

Страница: 110 / 122

110 ©Copyright 2011 CyberResearch, Inc.
CPGN CPU Card
D IO The digital inputs and digital outputs are general control signals that
control the on/off circuit of external devices or TTL devices. Data can be
read or written to the selected address to enable the DIO functions.
E H C I The Enhanced Host Controller Interface (EHCI) specification is a
register-level interface description for USB 2.0 Host Controllers.
E ID E Enhanced IDE (EIDE) is a newer IDE interface standard that has data
transfer rates between 4.0 MBps and 16.6 MBps.
E IS T Enhanced Intel® SpeedStep Technology (EIST) allows users to modify
the power consumption levels and processor performance through
application software. The application software changes the bus-to-core
frequency ratio and the processor core voltage.
F S B The Front Side Bus (FSB) is the bi-directional communication channel
between the processor and the Northbridge chipset.
G b E Gigabit Ethernet (GbE) is an Ethernet version that transfers data at 1.0
Gbps and complies with the IEEE 802.3-2005 standard.
G P IO General purpose input
H D D Hard disk drive (HDD) is a type of magnetic, non-volatile computer
storage device that stores digitally encoded data.
IC H The Input/Output Control Hub (ICH) is an Intel® Southbridge chipset.
IrD A Infrared Data Association (IrDA) specify infrared data transmission
protocols used to enable electronic devices to wirelessly communicate
with each other.
L 1 C a c h e The Level 1 Cache (L1 Cache) is a small memory cache built into the
system processor.
L 2 C a c h e The Level 2 Cache (L2 Cache) is an external processor memory cache.
L C D Liquid crystal display (LCD) is a flat, low-power display device that
consists of two polarizing plates with a liquid crystal panel in between.
L V D S Low-voltage differential signaling (LVDS) is a dual-wire, high-speed
differential electrical signaling system commonly used to connect LCD
displays to a computer.
P O S T The Power-on Self Test (POST) is the pre-boot actions the system
performs when the system is turned-on.