background image

BASIC OPERATION

1.  Power On Switch

  To turn the UPS on, press the power button 

for approximately 2 seconds - you will hear 

a constant tone (1 second) - and release 

after a short beep.

  To turn the UPS off, press the power button 

for approximately 2 seconds - you will hear 

a constant tone (1 second) - and release 

after two short beeps.

  Alarm setting: The audible alarm can be 

turned OFF or ON by quickly pressing the 

POWER button twice. The default setting 

is for the Alarm On. To turn the Alarm Off, 

quickly press the power button twice. You 

will hear two short beeps when the Alarm 

is turned off. To turn the Alarm back ON, 

quickly press the power button twice. You 

will hear a single short beep when the 

Alarm is turned on.

  *When the Alarm is turned off, there will 

be no audible notification when the UPS 

reaches a low battery state.

2.  Power On Indicator

  This LED is illuminated when the utility 

power is normal and the UPS outlets are 

providing power, free of surges and spikes. 

3.  Battery and Surge Protected Outlets

  The unit has several battery powered 

and surge protected outlets to ensure 

temporary uninterrupted operation of your 

equipment during a power failure. 

(DO 

NOT plug a laser printer, paper shredder, 

copier, space heater, vacuum cleaner, sump 

pump, or other large electrical device into 

the “Battery and Surge Protected Outlets.” 

The power demands of these devices will 

overload and possibly damage the unit.)

4.  Full-Time Surge Protection Outlets

  The unit has several surge suppression  

outlets.

5.  Circuit Breaker

  Located on the side of the UPS, the circuit 

breaker serves to provide overload and 

fault protection. 

6.  USB Port to PC

  The port allows connection and 

communication between the USB port on 

the computer and the UPS unit. The UPS 

communicates its status to the PowerPanel® 

Personal software.

7.  Outlets Designed for AC Adapters

The UPS unit has four widely-spaced 

outlets, so AC power adapters can be 

plugged into the UPS without overlapping 

or blocking adjacent outlets.

SYSTEM FUNCTION BLOCK DIAGRAM

Input

Output

Battery Mode

Normal Mode

EMI

Filter

Surge

Suppressor

Inverter

Charger

AC / DC

Battery

Отзывы: