Copyright © 2012 CyberPower Systems, Inc.
BASIC OPERATION
6
CONNECTION #1 : CONNECT AC WIRES TO TERMINAL BlOCKS
CAUTION: To avoid electric shock, please read and follow all instructions carefully during the following operation
Step 1: Loosen the M3 screws to remove the metal covers of the AC input and output terminal blocks (as photograph 1).
Step 2: Connect the AC power to input terminal block, and the load to output terminal block. The line
、
neutral and ground must be
connected correctly. Then use the cable ties to fix the AC wires to rings below the terminal blocks (as photograph 2).
Step 3: Tighten the metal covers with M3 screws (as photograph 3).