CyberPower MP60BK Скачать руководство пользователя страница 1

USER MANUAL

Surge Protection

Multi-Pack

MP60BK/MP61WH/MP62BL

Surge Protection

Multi-Pack

MP60BK/MP61WH/MP62BL

Copyright © 2019 Cyber Power Systems (USA), Inc. All rights reserved.

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower MP60BK/MP61WH/ 
MP62BL Surge Protection Multi-Pack. This manual explains the 
features and operation of the Surge Protection Multi-Pack. 
Please take a few moments to read this manual.

3-Outlet Extension Cord

with 2 USB Ports

P303UBK/P303U/P303UBL

EXTENSION CORD INSTRUCTIONS

1.  Plug the extension cord into a standard grounding wall receptacle by fully 

inserting the plug and ensure that there are no exposed conductors.

2. Make sure the electronic equipment is turned off before plugging into the 

extension cord outlets. Do not use extension cords to connect equipment 

to the extension cord.

FEATURES

1.  Standard Grounded Outlets (3)

2. USB Charging Ports* (2)

Connect and charge up to two (2) USB devices using the surge protected 

USB charging ports.

*USB outlets cannot be used as a USB hub. This device does not 

transfer data.

SPECIFICATIONS

• Model Number: P303UBK/P303U/P303UBL

• Outlets: Standard Grounded Outlets (3)

• Surge Protection: 350 Joules

• Electrical Rating: 125 V/13 A/1625 W/60 Hz

• USB Charging Rating: 5 V/2.4A shared

• UL Clamping Voltage: UL 1449 4th/900 V (L-N)

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK

 - Use only in dry locations and 

only indoors. 

DO NOT

 plug into another relocatable power tap. 

DO NOT

 

“daisy chain” extension cords. 

DO NOT

 use with any aquarium equipment. 

DO NOT

 use if properly grounded outlets are not available. 

DO NOT

 install 

this device if there is not at least 10 meters (30 feet) or more of wire 

between the electrical outlet and electrical service panel. This device 

features an internal protection that will disconnect the surge protective 

component at the end of its useful life, but will maintain power to the load – 

now unprotected. If this situation is undesirable for the application, follow 

the manufacturer’s instructions for replacing the device. The conductors 

used to connect the SPD to the line or bus and to ground shall not be any 

longer than necessary and shall avoid unnecessary bends. 

DO NOT

 plug 

devices over 2.4A to each USB port.

2-Outlet Surge Protector

P2WUBK/P2WU/P2WUBL

FEATURES

1.  Surge Protected Indicator

Illuminated when the surge protection feature is working properly.

2. USB Charging Ports* (3)

Connect and charge up to three (3) USB devices using the surge 

protected USB charging ports.

*USB outlets cannot be used as a USB hub. This device does not 

transfer data.

3. Side-Facing Standard Grounded Outlets (2)

SPECIFICATIONS

• Model Number: P2WUBK/P2WU/P2WUBL

• Outlets: Standard Grounded Outlets (2)

• USB Charging Rating: 5 V/4.2A total

• Surge Protection: 600 Joules

• Electrical Rating: 125 V/15 A/1875 W

• UL Clamping Voltage: UL 1449 4th/800 V (L-N)

• Maximum Peak Current: 15,000 A

• AC Lines Protected: L-N: 15,000 A

• Response Time: Less than 1 nanosecond

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK

 - Use only in dry locations and 

only indoors. 

DO NOT

 plug into another relocatable power tap. 

DO NOT

 

“daisy chain” surge protectors. 

DO NOT

 use with any aquarium equipment. 

DO NOT

 use if properly grounded outlets are not available. 

DO NOT

 install 

this device if there is less than 10 meters (30 feet) or more of wire between 

the electrical outlet and electrical service panel. 

DO NOT

 use for medical or 

life support equipment. This device features an internal protection that will 

disconnect the surge protective component at the end of its useful life, but it 

will maintain unprotected power to the load.

TROUBLESHOOTING

 If the protected indicator does not light, the surge protector’s AC lines are 

no longer protected from surge. The surge protector may have received a 

power surge or spike beyond its specified limits that overloaded the 

protection circuitry and rendered it inactive. The surge protector has 

protected your connected equipment as designed, but it will not protect 

against future surges, and spikes. It should be replaced.

Front

1

Side

2

Top

2

3

3

2

1

Отзывы: