CyberPower CPS625AVR Скачать руководство пользователя страница 3

 

 CPS625AVR  

Guaranteed Uninterruptible Power System 

 

 

WHAT IS AVR? 

These machines provide complete power protection from utility power that is not always consistent.  
The 

CPS625AVR 

features 600 Joules of surge protection, and provide long lasting battery backup 

with a 7.2AH battery for loss of utility power and voltage sags.  The

 CPS625AVR 

ensures consistent 

power to your computer system and include software that will automatically save your open files and 
shutdown your computer system during a utility power loss. 

AUTOMATIC VOLTAGE 
REGULATOR 

The

 CPS625AVR 

controls utility power 

voltage levels that can be inconsistent.  
The incoming utility power may be at a 
damaging level to important data files, but 
with the Automatic Voltage Regulation of 
these units,

 

the computer will only experi-

ence a consistent voltage level.  An Automatic Voltage Regulator automatically increases low or 
decreases high voltage to a consistent, computer safe 110v/120v.  The unit’s powerful 7.2AH battery 
will provide power only if the incoming voltage drops below 92v or increases above 140v. 
 

DESCRIPTION

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
INSPECTION 
The box should contain the following: 
(1) PowerPanel™ software (floppy disk); (1) serial interface cable (DB-9); (1) serial-to-USB cable; 
(1) telephone communication cable; (1) user manual; (1) warranty registration card; (1) UPS unit. 
 

 

Power On Indicator 

This LED is illuminated when the utility condition 
 is normal and the UPS outlets are providing “clean 
power”, free of any surges or spikes. 

 Electrical Wiring Fault Indicator 

This LED indicator will illuminate to warn the user 
 that a wiring problem exists, such as bad ground, 
missed ground, or reversed wiring.  If this is 
 illuminated, user is advised to disconnect all  
electrical equipment from the outlet and have an  
electrician check the outlet to insure proper ground. 

 

Circuit Breaker 

Located on the side of the unit, the circuit  
breaker serves to provide circuit overload and fault 
protection.  Under normal conditions, the circuit 
 breaker is flush with the unit. 

 

Serial Port to PC 

The UPS communicates its status through the serial 
connection to the PowerPanel™ software.  The use 
of the software is optional. 

 

Communication Protection Ports 

The communication protection ports are  
designed to protect standard modem, Fax,  
Telephone or network line. 

 

Battery Back-up and Surge Pro-

tected Outlets 

Provides three battery-supplied outlets 
with Automatic Voltage Regulation  
(AVR) for consistent output power to 
connected equipment. 

 “

Always-on” Outlets Provide Maxi-

mum Surge Protection 

Provides three surge-protected outlets  
to protect connected equipment against 
surges and spikes. 

 

Power Switch 

Can be used as the master on/off switch 
for computer equipment connected to  
the battery power supplied outlets. 

Содержание CPS625AVR


















Отзывы: