CyberPower CPS325SL Скачать руководство пользователя страница 12

 

12 

claim under any applicable insurance, 
other warranty, or extended warranty.   
The Power Control Guarantee is 
separate from the Limited Warranty, 
but they are related.  The Limited 
Warranty does not cover Connected 
Equipment, but as is explained below, 
to be covered under the Power 
Control Guarantee, the Connected 
Equipment must have been damaged 
due to a failure of the Product that is 
covered  by  the  Limited  Warranty.    
The Connected Equipment must have 
been damaged due to a defect in 
materials or workmanship of the 
Product, and the Product must still be 
covered by the Limited Warranty and 
the Initial Customer has made a valid 
claim for the Product under the 
Limited Warranty. 
In the event of damage to the Con-
nected Equipment, your exclusive 
remedy and CyberPower’s sole 
obligations are as follows for Con-
nected Equipment.   If (a) the Product 
purchased and owned by you is 
defective in material or workmanship 
under the Limited Warranty or any 
applicable Implied Warranty; (b) the 
Limited Warranty requirements have 
been met, and; (c) none of the limita-
tions or exclusions on warranty 
coverage apply, CyberPower will (as 
CyberPower elects, as permitted by 
law), repair, replace, or pay the 
Agreed Damage Amount (defined 
below) for, the item(s) of your elec-
tronic equipment directly and properly 
connected to the product (the “Con-
nected Equipment”) if that  Connected 
Equipment is (x) damaged by AC 
power line transients, spikes, or 
surges on properly installed, 
grounded, and code-compliant 120 
volt power lines in the United States 
and Canada, or by transients, surges 
or spikes on standard telephone 
equipment lines, or Base 10/100T 
Ethernet lines that are properly 
installed and connected (a “Power 
Disturbance”) and (y) is directly 
plugged into and properly connected 
to a CyberPower Product in its origi-
nal condition which is properly oper-
ated when a Power Disturbance 
passes through the CyberPower 
Product and (y.1) exhausts the 
protection capacity of the Cyber-
Power Product or (y.2) damages the 
CyberPower Product.   This provision 
sets out the only liability of any char-
acter of CyberPower for direct, indi-
rect, special, consequential, and/or 
incidental damages under our Limited 

Warranty, applies only to Connected 
Equipment, and all such Liability is 
limited to the Agreed Damage 
Amount.   
To make a Warranty claim for dam-
age to Connected Equipment under 
the Power Control Guarantee, you 
must do the following:   
Complete and return the CyberPower 
Warranty Registration Card or provide 
reasonable proof (for example, a 
sales receipt) that establishes you as 
the Initial Customer (the original 
consumer purchaser of the Product) 
within ten (10) days of the event for 
which you want to make a claim for 
warranty service. 
Call CyberPower at (952) 403-9500, 
or write to CyberPower at 5555 12th 
Avenue East, Suite 110, Shakopee, 
MN 55379, or E-Mail CyberPower at 

[email protected]

within ten (10) days of the event for 
which you want to make a claim for 
warranty service. 
3.When you call, write or E-Mail, 
identify the Product, the Purchase 
Date and the item(s) of Connected 
Equipment. Have information on all 
applicable insurance or other re-
sources of recovery/payment that are 
available to the Initial Customer for 
the Connected Equipment and the 
name of the power utility supplier for 
the location of the Connected Equip-
ment and request Return Material 
Authorization information from Cy-
berPower. 
4. Pack and ship the Product to 
CyberPower and, if requested by 
CyberPower the item(s) of Connected 
Equipment, a repair cost estimate for 
the damage to the Connected Equip-
ment and/or a written statement of 
how the damage occurred, as in-
structed in your Return Material 
Authorization.  Show the Return 
Material Authorization code on the 
shipping label or include it with the 
Product.  Initial Customer shall pre-
pay all shipping costs and is respon-
sible for packaging and shipment. 
CyberPower will inspect and examine 
the Product and the item(s) of Con-
nected Equipment (or at Cyber-
Power’s election, your written state-
ment and repair cost estimate for 
those item(s)).  You must return the 
product for inspection.   
If the Product is warranted under the 
Limited Warranty and the damage to 
Connected Equipment is covered by 
the Power Control Guarantee, Cy-
berPower will (in addition to Limited 

Warranty remedies for the Cyber-
Power Product itself) repair (or pay 
the costs of repair) or replace the 
Connected Equipment or, at the 
option of CyberPower, as permitted 
by law, pay to the Initial Customer the 
“Agreed Damage Amount”  (up to the 
aggregate limits stated below) for all 
item(s) of Initial Customer’s Con-
nected Equipment.  The “Agreed 
Damage Amount” for all items of 
Initial Customer’s Connected Equip-
ment shall be the lesser of the 
amount determined under Clause (1) 
or (2) below, reduced by any amounts 
described in Clause (3) below:   
The fair market value of the Con-
nected Equipment as established by 
the lower of (a) the average price the 
same or similar items are being sold 
for on eBay, (b) the price list of the 
Boston Computer Exchange on the 
date of occurrence (or if such price 
list is no longer published, a pub-
lished or announced price list rea-
sonably selected by CyberPower), or 
(c) the lowest price the Connected 
Equipment can be purchased for in 
the United States; or  
The aggregate ceiling amount for all 
Connected Equipment as set forth 
below, minus: 
The amount(s) of all payment you 
have or are entitled to receive from 
insurance, other warranties, extended 
warranties, or from other sources or 
persons for the Connected Equipment 
or damage to such equipment so that 
CyberPower’s maximum liability shall 
be reduced to reflect all such other 
payments or sources of recovery: 
CyberPower 325SL-$25,000.00 
If CyberPower replaces the Con-
nected Equipment or pays to the 
Initial Customer the Agreed Damage 
Amount, the Initial Customer shall 
transfer such item(s) to CyberPower 
without warranty by the Initial Cus-
tomer, but free of lien or other inter-
est.   

CONDITIONS COMMON TO THE 
LIMITED WARRANTY AND THE 
POWER CONTROL GUARANTEE

 

The Limited Warranty and the Power 
Control Guarantee are the only and 
the exclusive express warranty of 
CyberPower with respect to the 
Product.  This exclusion of other 
express warranties applies to written 
and oral express warranties.  Any 
Implied Warranty of Merchantability or 
for Fitness for a Particular Purpose, if 
applicable to the Product, is limited in 
duration to the period of ownership by 

Содержание CPS325SL














Отзывы: